rocksmith 2014 cable the device cannot start

#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START PDF#
#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START DRIVERS#
#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START SOFTWARE#
#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START PC#
#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START SERIES#

In that dialog, set the audio format to 1 channel, 16 bit, 48000 Hz. Here's what that dialog should look like: In that dialog, select the “Advanced” tab.

Select the device and then click the “Properties” button. If you have more than one Rocksmith Real Tone cable, you'll want to repeat this procedure for both cables. Here's an example of what it should look like:

Although other guitar input devices will take audio from your electric or bass guitar, Rocksmith 2014 only supports the Real Tone Cable.įrom the sound control panel, select the “Recording” tab. The game requires you to have a Rocksmith Real Tone Cable in order to play. Once you've configured your audio output device, you'll need to configure your Rocksmith Real Tone cable.Ĭonfiguring Your Rocksmith Real Tone Cable If you have the option, set your audio device to give exclusive mode applications priority. You should also set the device to allow exclusive mode to applications. In this dialog, you should set the output to 16 bit, 48000 Hz output. In the Properties dialog, select the “Advanced” tab. Once you have the output set to stereo, and you're back at the “Playback” tab of the Sound control panel, select the device again and click the “Properties” button. Here's what that dialog box might look like: Use these dialogs to set your output device to 2 channel stereo. This will open the speaker configuration dialog. Select that device and click the“Configure” button. Your desired output device should be set as the “Default Device”.

#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START DRIVERS#

Though different audio drivers provide a variety of configuration software, here's an example of what it should look like: Open your Sound control panel, and select the “Playback” tab. Finally, configure both devices to allow applications to take exclusive control of the device. Audio output should also be set for 2 channel playback. Both devices should be set to operate using a sample rate of 48 kHz using a 16 bit sample size. For best results, you'll need to configure both your output device and the Rocksmith Real Tone Cable. If the audio system isn't configured correctly, you may experience a significant amount of lag or latency between strumming your guitar and hearing the sound. Proper configuration of your audio hardware is important for achieving the best performance and gameplay experience with Rocksmith 2014 on your PC.

#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START PC#

Very often laptop or budget PC manufacturers may carry the same specifications but won’t have nearly as good performance, so your experience running Rocksmith on a laptop or budget PC may be less than optimal. Our PC specifications are intended as rough guideline, and are based on mainstream desktop PCs using these specifications. These chipsets are the only ones that will run this game. Laptop versions of these cards may work, but are not supported.

#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START SERIES#

*Supported Video Cards at Time of Release:ĪMD Radeon HD 2600 XT / 3000 / 4000 / 5000 / 6000 / 7000 series

Graphics: 256 MB DirectX 9.0c- compliant with Shader Model 3.0 or higher (see supported list)*.

Processor: 2.40 GHz Intel Core 2 Duo T7700 or better.

Graphics: 256 MB DirectX 9.0c- compliant with Shader Model 3.0 or higher (see supported list).

Processor:2.40 GHz Intel Core 2 Duo T7700.

Processor:3.06 GHz Intel Core i3-540 or 3.30 GHz Athlon II X3 455 or better.

Graphics:256 MB DirectX 9.0c- compliant with Shader Model 3.0 or higher (see supported list)*.

In order to run Rocksmith 2014 properly, you must meet or exceed these minimum requirements.

#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START PDF#

The Real Tone Cable is compatible and required for all versions of Rocksmith.Please be aware that you can find the latest updated Configuration and FAQ for Rocksmith 2014 in the PDF located on your HDD. If you don’t have an electric guitar or simply want to use an acoustic to play Rocksmith, now you can! Use a USB microphone as your input device, point it at your acoustic guitar or bass, and enjoy strumming and picking in Rocksmith without a Real Tone Cable. How do I connect my Rocksmith guitar without real tone cable?

#ROCKSMITH 2014 CABLE THE DEVICE CANNOT START SOFTWARE#

As far as other programs, yes, the Rocksmith Real Tone Cable works with other software if you want to try out other effects software or do recording or the like. If you’re just trying to use a digital amp, Rocksmith would have you covered with Tone Designer and Amp mode. Can I use rocksmith cable on my computer? … But for Rocksmith 2014 you can use your own guitar, and the Real Tone Cable is, well, just a usb guitar cable. Can I use any USB Guitar Cable with Rocksmith?Įverything is possible thanks to the so called Ubisoft Rocksmith 2014 Real Tone Cable : a cable that connects your electric guitar jack output to a usb port on your pc (or XBox or PS3).

Rocksmith 2014 cable the device cannot start